Licensed & insured pool builders across New South Wales
Glass pool safety fence beside a pool

Pool Fencing & Safety Barriers in Fernleigh, NSW

Compliant child-safety barriers for Fernleigh pools built to AS 1926.1, in frameless glass, semi-frameless glass or tubular aluminium.

In Fernleigh, Pool Fencing & Safety Barriers is the supply and installation of a compliant fence or barrier separating the pool from the house and street. The work follows the Swimming Pools Act 1992 and AS 1926.1, then is inspected by a certifier.

Pool fencing in Fernleigh sits at the intersection of design and child safety law, and getting it right protects both your family and the legality of the pool. The controlling document across New South Wales is AS 1926.1. It requires a barrier at least 1200mm high measured on the outside, a gap under the fence of no more than 100mm, and gaps between vertical members held to 100mm so a small child cannot squeeze through. Gates draw the most scrutiny: they must open away from the pool, latch automatically from any position, and never be propped. A 900mm non-climbable zone has to be preserved, which means keeping pot plants, pumps, barbecues and climbable rails well clear of the inside face. We install three main barrier types across Byron properties. Frameless glass gives an almost invisible edge, semi-frameless glass uses slim posts to cut the cost, and powder-coated tubular aluminium offers durability and value on larger or windier Northern Rivers sites. Glass panels are toughened safety glass and fixed on engineered spigots; aluminium panels bolt to posts set in concrete footings sized for the ground conditions. The Pool Fencing & Safety Barriers also covers boundary fences that double as pool barriers, which carry their own height and gap rules, and existing fences that no longer comply because the standard has tightened over the years. After installation the Pool Fencing & Safety Barriers concludes with the compliance inspection and the certificate required to register the pool on the NSW Swimming Pools Register. The result around your Fernleigh pool is a barrier that suits the home, holds up to weather and traffic, and gives you a documented, inspected guarantee that the pool meets the standard.

Pool Fencing & Safety Barriers Questions for Fernleigh

What does AS 1926.1 require for a pool barrier in Fernleigh?
A compliant barrier is 1200mm high at minimum, with gaps no wider than 100mm and no more than 100mm under the bottom rail. Gates swing away from the pool and must close and latch by themselves from any open position. The latch is positioned high or shielded, and a non-climbable zone keeps footholds out of reach, as AS 1926.1 requires.
Should I choose glass or aluminium pool fencing?
Frameless glass keeps sightlines open and suits views, but it shows marks and needs regular cleaning. Aluminium is lower cost, durable and needs little maintenance, with powder-coated colours and styles to choose from. Both can comply with AS 1926.1. Budget, exposure and the look of the Fernleigh home usually decide.
Who inspects and certifies a pool barrier in Fernleigh?
Yes. New pools need the barrier inspected before they can be used, and existing pools can be inspected by council or an accredited certifier. In NSW a valid certificate of compliance is also required when a property with a pool is sold or leased. Registration on the NSW Swimming Pool Register is a separate step.
Can I use my boundary fence or house wall as part of the pool barrier?
Sometimes. A boundary fence can form part of the barrier, but in New South Wales it must be at least 1.8 metres high on the pool side, higher than the 1.2 metre minimum for a standard pool fence, and it still needs the gap and non-climbable rules. House walls with doors or opening windows generally cannot be used, so the layout is checked against AS 1926.1 before work starts in Fernleigh.

Other Pool Services in Fernleigh

← Back to Fernleigh pool builders